Home Site Map MDC Securite

Security Alarms

Security Tips

Security Articles

Resources

Directory

Articles

learn how to fix a leaky faucet

It is very crucial for you to learn how to fix a leaky faucet nowadays, especially with the high costs of getting a plumber, and with the nuisance that a leaking faucet brings. Now there's no need for you to call a plumber and go through shock after shock upon receiving the high billing. Just go through these easy to follow and simple steps and you'll be fixing that annoying leaky faucet in no time. Learning how to fix a leaky faucet is actually very easy, as long as you are equipped with the right tools and materials. Basically, all you need is a new washer (preferably one that is suited to the faucet you have at home), some rags, a wrench, and a screwdriver (flathead and Philipps).

Before you start tinkering with your leaky faucet, turn off the main water source. Most faucets have a shutoff or control valve somewhere along its pipes located under the sink. Turn it counter-clockwise to shut it off. Aside from that, make sure you plug up the drain with some rags. This is to avoid small parts like screws and washers from going down the drain.

Once you have accomplished that, you can start with the process of fixing the leaky faucet. But be informed that these steps can be applied only to conventional faucets. Most unconventional faucets differ from one another depending on type and brand and you might need specific repair kits for it.

1. Under the handle, there is a nut where the faucet stem is joined to the water pipe. Use your wrench and twist the nut loose to remove it (counter-clockwise direction). With it, also turn the handle counterclockwise to take it off. 2. Once the handle is off, you can right away see a rubber-like washer held by a screw.

This washer is probably very old and dilapidated, and this could be the reason behind the leaks. Unscrew the old washer using a screwdriver and install a new one. Make sure that the new washer is of the same size with the old washer. Tighten the screws to secure the new washer in place. 3. Put everything back into place.

Reinstall the faucet handle (clockwise, this time), and tighten the stem nut back to its original position. 4. Time to check if you did everything right.

Turn on your main water supply and see whether your faucet still leaks. If it still does, you probably have to tighten the screws even more. If by then, it still leaks, maybe you should try getting a new faucet instead of just replacing the washer. And of course, when there seems to be no way, give up and call a plumber.

And there they are - easy to follow and simple steps that will guide you about how to fix a leaky faucet. Now you can do it by yourself! There's no need for you to call a plumber, or even your handy neighbor to help you around a leaky faucet. By doing it yourself, you free yourself from irritating dripping sounds, nasty sink stains brought upon by long-standing drips, and water wastage due to constant dripping. Put these steps close to your heart and you will never be in distress again.

Read more about how to fix a leaky faucet. All you need is fix a leaky faucet guide!



Home Security






Canopies are Helpful for Outdoor Events - Most canopies are found in flea markets or art shows, which use them for making quick and temporary stalls.

Scented Candle Secrets Custom Scent Your Home for Cheap - Whole empires have been built around our noses' need for atmosphere.

Furniture and Your Dcor - Choosing the right furniture for your home can be challenging and pricey, so take into account tips like these that can save time and money.

Tips on Modernizing You Interior Design - A modern interior look doesn't have to be just black and chrome.

Prefab Homes are Becoming Increasingly Popular - People who purchase prefab homes from all of the social classes and have different interests.

more...



© Copyright 2019 MDC-Securite.com All rights reserved.
Unauthorized duplication in part or whole strictly prohibited by international copyright law.